Or light Unica 860

Home / Unica / Unica 860

With the OR lamps of the UNICA series, RIMSA has achieved the complete elimination of the glaring effect.
UNICA offers a deep light, layered and, above all, that does not dazzle. The reflected light passes through a screen with a roughness index such as to stratify and collide the light beam.

OR light Unica 860

OR light UNICA 860 is a lamp with unparalleled performance intended for use in major surgeries.
Its main features are:

– The availability of 7 different colour temperatures
– Light always on focus
– The ability to adjust light intensity, colour temperature and light field diameter through a sterilisable handle
– Ambient light
– 2R Double Reflection system: thanks to the 2R Double Reflection technology it is possible to obtain a complete suppression of shadows, the maximization of the light emitting surface and a glare-free light
– Light intensity at 1 mt distance: 160.000 lux

Configurations

Performances

Illumination (Ec) at 1 m distance

160.000 lux

Light head diameter

86 cm

Colour temperature (7 selections)

from 3.800 to 5.000 K

Light field diameter (2 selections)

150 - 380 mm

Average LED life

> 60.000 hours

Light intensity control

10 - 100 %

Performances

Accessories &
Main Features

Battery Group

Battery Group

Close
Double Yoke

Double Yoke

Close
Wireless

Wireless

Close
Monitor Arm

Monitor Arm

Close
Remote Control

Remote Control

Close
Wall Control Panel

Wall Control Panel

Close
Light Emitting Surface

Light Emitting Surface

The most efficient way to obtain a reliable scialytic effect is to illuminate an area with a large cupola which ensures that no shadows will occur because several lighting rays from multiple origins insist over the same spot, thus allowing to have light on the field even when obstacles are present. The need for a large cupola is not a requirement for a cupola with a large diameter but rather for a cupola with a large light emitting surface. The light emitting surface of a cupola depends upon the technology used: since LEDs are spaced between each other on the reflector, the light emitting surface generated by DIRECT LED light is smaller compared to that of halogen light.
In order to compensate for this problem, Rimsa studied INDIRECT LED light, which, together with the other advantages offered by LEDs, allowed LED technology to become the main light source in the medical field.

Close
2R Double Reflection

2R Double Reflection

In 2017, Rimsa patented the 2R, a double reflection technology which ensures the maximization of the light emitting surface area, thus allowing UNICA Series products to achieve a terrific scialytic effect and a completely glare free illumination.

Close
E - View

E - View

An additional light source called E-View (Extended-View) makes it possible to expand the lit field at the edges without affecting the light intensity at the centre (Ec). Such perk allows the light to become an optimal solution for the following procedures: thoracic surgery, abdominal surgery, caesarean births and all those procedures when the surgeon needs to operate with an extended field.

Close
E - Deep

E - Deep

The centre of the lamp is fitted with an additional LED module specifically designed to reflect deep light. E-deep means the surgeon can operate with perfect 3D lighting, especially in cavities.

Close
HD Camera

HD Camera

Both available in HD and 4K both wired and Wi-Fi. The camera is very user
friendly; it has been designed to be a plug and play device. You only need to place the
camera on the predisposition and it works automatically. The camera can be swapped
on any reflector of a medical system and can even be used on a different Rimsa light.

Close
4K Camera

4K Camera

Both available in HD and 4K both wired and Wi-Fi. The camera is very user
friendly; it has been designed to be a plug and play device. You only need to place the
camera on the predisposition and it works automatically. The camera can be swapped
on any reflector of a medical system and can even be used on a different Rimsa light.

Close